Skip to end of metadata
Go to start of metadata

Contents


Note

To see what version your software is on, go to the System Information section and follow the directions. The current certified software version is 1.0.0.50.



Accessing the MobiWIC Settings

To access the settings for your MobiWIC terminal:

  1. Within the MobiWIC main menu click with your MobiWIC stylus “[F1] Settings”.  Alternatively you can also press the “F1” button on your MobiWIC terminal keypad.


     
  2. You will see the “Settings - Options” screen.  The below sections will describe each of these options.


Top of Page


User Preferences

To access the “USER PREFERENCES” option:

  1. Within the MobiWIC main menu click with your MobiWIC stylus “[F1] Settings”.  Alternatively you can also press the “f1” button on your MobiWIC terminal keypad.  Press the “2” button on your MobiWIC terminal keypad.



  2. You have the below preference options.  When finished make sure to press the “ENT” button on your MobiWIC terminal to save your preferences.  After the changes are saved you will see the message “Changes successfully applied!” and will be automatically returned to the “Settings - Options” screen.
    1. Print Beginning Balance: Check to enable or remove the checkmark to disable.
    2. Notifications Display Time (seconds): Click to select the amount of time you want notifications to be displayed.
    3. Terminal Timeout (seconds): Click to select the amount of time before your MobiWIC terminal times out.
    4. Automatic Keyboard Display:  Check to enable or remove the checkmark to disable.
       

Top of Page


System Information

To access the “SYSTEM INFORMATION” option:

  1. Within the MobiWIC main menu click with your MobiWIC stylus “[F1] Settings”.  Alternatively you can also press the “F1” button on your MobiWIC terminal keypad.  Press the “4” button on your MobiWIC terminal keypad.  The MobiWIC terminal “Device ID”, “OS Version” and “POS Software Version” will be displayed.


     
  2.   From here you have the options to exit this screen, print the system information or to set the date/time.  Here’s how:
    1. [F3] Back: To exit the “System Information” screen click the “F3” button on your MobiWIC terminal keypad.  Alternatively you can also click with your MobiWIC stylus “[F3] Back”. 
    2. [F1] Print: To print the system information click the “F1” button on your MobiWIC terminal keypad.  Alternatively you can also click with your MobiWIC stylus “[F1] Print”.  The Terminal Setting Report will print.
    3. [F2] Set Date/Time: To set the MobiWIC terminal date/time contact SoliSYSTEMS Support at support@solisystems.com 


Top of Page

Page viewed times