Skip to end of metadata
Go to start of metadata

No MobiWIC Icon?

Do you see a blue screen with no MobiWIC icon? Dont worry, it's easy to fix! Follow the step-by-step instructions below, or watch the short video to have your MobiWIC Terminal up and running again!

Watch the video:

Step-by-Step Instructions

(covered in video)

You will re-install 3 files already contained within the device:

  1. From the main screen of the device, double-click on "MY DEVICE"
  2. Double-click on "FILEBOX"
  3. From the top menu in FILEBOX, select "VIEW"
  4. Select "OPTIONS"
  5. From Folder Options, un-check/deselect "Do Not Show Hidden Files and Folders"
  6. Press "OK"
  7. Locate the following 3 files in FILEBOX:
    1. "MobiWICSetup-STM7700"
    2. "NETCFv35.Messages.EN"
    3. "NETCFv35.wce.armv4"
  8. You will set each file to "Read-Only". Press your stylus on each of these files until a menu appears. 
  9. For each file, select "PROPERTIES", then check the "READ-ONLY" option
  10. Press "OK"
  11. Double-click on each of the 3 files to install them.
    Note: You may install these files in any order you wish
  12. Click "OK" whenever you see  a prompt of "ALREADY INSTALLED" or "INSTALL"
  13. Allow each file to finish installing
  14. When the last file has completed installing, exit to the main screen of the device
  15. Your MobiWIC icon should  now be visible
  16. Turn the device over. On the bottom left on the underside of the device, quickly press the red "RESET" button using the stylus
  17. Following the device reset, the normal device background picture should return. 

MobiWIC should now function normally!







 Online Support Form:   Click here for MobiWIC Support Request


Nearly all problems or questions with your MobiWIC terminal can be resolved using our MobiWIC Help Site. This is always the fastest and best way to get your questions answered, and to learn the most about your MobiWIC Terminal. 

 Additional Support Information:

The easiest and fastest way to get assistance is right from your MobiWIC Website! Just click on the red HELP button. Your message will be sent directly to our IT Support Team for a quick response.

To contact us directly for items you are unable to resolve, please contact us at:

Gerber has won the bid for Ohio WIC's Infant Foods Contract effective April 1, 2018. Gerber Infant products will replace Beech-Nut Items.


Beech-Nut infant foods benefits will continue to be issued through March 31, 2018. Some WIC participants will have redeemable Beech-Nut products through June 30, 2018.



If you currently sell Beech-Nut WIC items, you will need to update your MobiWIC Inventory to Gerber once you have Gerber WIC Items in stock.






  2017 © SoliSYSTEMS, Corp.
Facebook: Like SoliSYSTEMS | Twitter: Follow @solisystems | LinkedIn: Connect SoliSYSTEMS

Page viewed times